User safety
User Safety
Warning:
Carefully read the Safety Instructions and Product User Guide before using this product. The person responsible for the instrument must ensure that all users understand and adhere to these instructions.
Caution:
While the laser tool is in operation, be careful not to expose your eyes to the emitting laser beam (green light source). Exposure to a laser beam for an extended time may be hazardous to your eyes.
Caution:
STAK recommend the use of laser safety glasses to protect your eyes.
Warning:
The following label placed on your laser tool to inform of the laser class is for your convenience and safety. Please reference the Product User Guide for the specifics on a particular product model.
DO NOT remove any warning labels on the housing. This instrument must only be used for centre marking purpose tasks as outlined in the Product User Guide.
ALWAYS make sure that any bystanders in the vicinity of use are made aware of the dangers of looking directly into the laser beam.
DO NOT combine with other optical instruments. Do not modify the instrument, or make manipulations, or use in other applications than those described.
DO NOT look into the beam with optical aids, such as magnifiers, binoculars, or telescopes.
DO NOT stare into the laser beam.
DO NOT direct the laser beam at other persons.
ALWAYS turn the laser tool OFF when not in use. Leaving the laser tool ON increases the risk of someone inadvertently staring into the laser beam.
DO NOT operate the laser tool in combustible areas such as in the presence of flammable liquids, gases, or dust.
DO NOT disassemble the laser tool. There are no user serviceable parts inside. Disassembling the laser will void all warranties on the product. Do not modify the product in any way. Modifying the laser tool may result in hazardous laser radiation exposure.
DO NOT use the instrument in areas where a risk of explosion is present.
NOTE: Since the laser beam is of the focused type, ensure you check the beam’s path over a relatively long distance and take all necessary precautions to ensure the beam cannot interfere with other persons.
Battery Safety
Warning:
Batteries can explode or leak and can cause injury or fire. To reduce this risk ALWAYS follow all instructions and warnings on the battery label.
End of Life
DO NOT dispose of this product with household waste.
ALWAYS dispose of batteries per local code.
PLEASE RECYCLE in line with local provisions for the collection and disposal of electrical and electronic waste under the WEEE Directive.
Declaration of Conformity
STAK declares that the CE Mark has been applied to this product in accordance with the CE
BS EN 60825:1-2014+A11:2021, Class 2 or 3m laser (green laser) <1.5mw ideally but could be up to <5mw 532 nm (green laser). For further details please refer to the STAK website.
Maintenance and Care
NOTE: To prevent the laser from overheating switch off when not in use, this will prevent the laser from overheating.
NOTE: The laser tool is not waterproof.
DO NOT allow the Laser to get wet. Damage to internal circuits may result.
DO NOT leave the laser tool in direct sunlight or expose it to high temperatures.
DO NOT store the laser tool in a cold environment. Moisture may form on interior parts when warming up. The moisture could fog up laser windows and / or cause corrosion of internal circuit boards.
NOTE: When working in dusty locations, some dirt may collect on the laser window, please blow out with a low-pressure hose.
DO NOT use aggressive cleaning agents or solvents.
NOTE: Store the laser tool in its case when not in use. If storing for extended time, remove the battery before storage to prevent possible damage to the instrument.
Warranty
One Year Warranty
STAK has warranted the laser against deficiencies in materials and / or workmanship for one year from the date of purchase.
Deficient products will be repaired or replaced, if sent together with proof of purchase to: Stakengineering.com
This warranty does not cover deficiencies caused by accidental damage, wear and tear, use other than in accordance with the manufacturer's instructions, or repair or alteration of this product not authorised by STAK.
Repair or replacement under this warranty does not affect the expiry date of the warranty.
To the extent permitted by law, STAK shall not be liable under this warranty for indirect consequential loss resulting from deficiencies in this product.
This warranty may not be varied without the authorisation of STAK.
The warranty does not affect the statutory rights of consumer purchasers of this product.
This warranty shall be governed by and construed in accordance with the laws of the country where STAK is purchased, and STAK and the purchaser each irrevocably agrees to submit to the exclusive jurisdiction of the courts of the country over any claim or matter arising under or in connection with this warranty.
Calibration and care are not covered by the warranty.
NOTE: The customer is responsible for the correct use and care of the instrument.
Subject to change without notice
GB Patent Application No 2200214.1
European Patent Application No 23150863.1
US Patent Application Publication US 2023/0220931 A1
LASER SAFETY
Caution:
While the laser tool is in operation, be careful not to expose your eyes to the emitting laser beam (red light source). Exposure to a laser beam for an extended time may be hazardous to your eyes.
DO NOT remove any warning labels on the LASER. This instrument must only be used for tasks as outlined in the STAK USER INSTRUCTIONS
ALWAYS make sure that any bystanders in the vicinity of use are made aware of the dangers of looking directly into the laser beam.
Do not point the Laser at any Aircraft or Vehicle that is in motion.
Do not insert in any part of the Laser into the Human Body